ZyXEL Communications 110, 1100, 310 manual 102

Chapter 6 Monitor

Table 36 Monitor > Log (continued)

LABEL	DESCRIPTION
Email Log Now	Click this button to send log message(s) to the Active e-mail address(es) specified
	in the Send Log To field on the Log Settings page (see Section 38.3.2 on page
	489).
Clear Log	Click this button to clear the whole log, regardless of what is currently displayed on
	the screen.
#	This field is a sequential value, and it is not associated with a specific log message.
Time	This field displays the time the log message was recorded.
Priority	This field displays the priority of the log message. It has the same range of values
	as the Priority field above.
Category	This field displays the log that generated the log message. It is the same value used
	in the Display and (other) Category fields.
Message	This field displays the reason the log message was generated. The text “[count=x]”,
	where x is a number, appears at the end of the Message field if log consolidation is
	turned on (see Log Consolidation in Table 196 on page 490). and multiple entries
	were aggregated to generate into this one.
Source	This field displays the source IP address and the port number in the event that
	generated the log message.
Destination	This field displays the destination IP address and the port number of the event that
	generated the log message.
Note	This field displays any additional information about the log message.

The Web Configurator saves the filter settings if you leave the View Log screen and return to it later.

102
	ZyWALL 110/310/1100 Series User’s Guide