ZyXEL Communications 110, 1100, 310 37.12 Language Screen, 37.13 IPv6 Screen, Configuration > System > IPv6, Configuration > System > Language

Chapter 37 System

Table 191 Configuration > System > SNMP (continued)

LABEL	DESCRIPTION
#	This the index number of the service control rule.
	The entry with a hyphen (-) instead of a number is the ZyWALL’s (non-configurable) default
	policy. The ZyWALL applies this to traffic that does not match any other configured rule. It
	is not an editable rule. To apply other behavior, configure a rule that traffic will match so
	the ZyWALL will not have to use the default policy.
Zone	This is the zone on the ZyWALL the user is allowed or denied to access.
Address	This is the object name of the IP address(es) with which the computer is allowed or denied
	to access.
Action	This displays whether the computer with the IP address specified above can access the
	ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).
Apply	Click Apply to save your changes back to the ZyWALL.
Reset	Click Reset to return the screen to its last-saved settings.

37.12 Language Screen

Click Configuration > System > Language to open the following screen. Use this screen to select a display language for the ZyWALL’s Web Configurator screens.

Figure 334 Configuration > System > Language

The following table describes the labels in this screen.

Table 192 Configuration > System > Language

LABEL	DESCRIPTION
Language Setting	Select a display language for the ZyWALL’s Web Configurator screens. You also need
	to open a new browser session to display the screens in the new language.
Apply	Click Apply to save your changes back to the ZyWALL.
Reset	Click Reset to return the screen to its last-saved settings.

37.13 IPv6 Screen

Click Configuration > System > IPv6 to open the following screen. Use this screen to enable IPv6 support for the ZyWALL’s Web Configurator screens. See the IPv6 Overview on page 106 for more information about IPv6.

	483
ZyWALL 110/310/1100 Series User’s Guide