ZyXEL Communications 110, 1100, 310 manual 185

Chapter 8 Trunk

Table 66 Configuration > Network > Interface > Trunk > Edit (System Default) (continued)

LABEL	DESCRIPTION
Spillover	This field displays with the spillover load balancing algorithm. Specify the maximum
	bandwidth of traffic in kilobits per second (1~1048576) to send out through the
	interface before using another interface. When this spillover bandwidth limit is
	exceeded, the ZyWALL sends new session traffic through the next interface. The
	traffic of existing sessions still goes through the interface on which they started.
	The ZyWALL uses the group member interfaces in the order that they are listed.
OK	Click OK to save your changes back to the ZyWALL.
Cancel	Click Cancel to exit this screen without saving.

	185
ZyWALL 110/310/1100 Series User’s Guide