Chapter 4 Quick Setup Wizards

Figure 25 WAN Interface Setup: Step 2

The screens vary depending on what encapsulation type you use. Refer to information provided by your ISP to know what to enter in each field. Leave a field blank if you don’t have that information.

Note: Enter the Internet access information exactly as your ISP gave it to you.

4.2.3 Configure WAN Settings

Use this screen to select whether the interface should use a fixed or dynamic IP address.

Figure 26 WAN Interface Setup: Step 2

•WAN Interface: This is the interface you are configuring for Internet access.

•Zone: This is the security zone to which this interface and Internet connection belong.

•IP Address Assignment: Select Auto If your ISP did not assign you a fixed IP address. Select Static if you have a fixed IP address.

4.2.4WAN and ISP Connection Settings

Use this screen to configure the ISP and WAN interface settings. This screen is read-only if you set the IP Address Assignment to Static.

Note: Enter the Internet access information exactly as your ISP gave it to you.

 

45

ZyWALL 110/310/1100 Series User’s Guide