ZyXEL Communications 110, 1100, 310 Down, Full, Half, Inactive

	Chapter 5 Dashboard
Table 14 Dashboard (continued)
LABEL	DESCRIPTION
Device	This field displays the name of the device connected to the USB port if one is connected.
Status	This field displays the current status of each interface or device installed in a slot. The
	possible values depend on what type of interface it is.
	Inactive - The Ethernet interface is disabled.
	Down - The Ethernet interface is enabled but not connected.
	Speed / Duplex - The Ethernet interface is enabled and connected. This field displays the
	port speed and duplex setting (Full or Half).
	For cellular (3G) interfaces, see Section 7.5 on page 132 the Web Help for the status that
	can appear.
Zone	This field displays the zone to which the interface is currently assigned.
IP Address/	This field displays the current IP address and subnet mask assigned to the interface. If the
Mask	interface is a member of an active virtual router, this field displays the IP address it is
	currently using. This is either the static IP address of the interface (if it is the master) or
	the management IP address (if it is a backup).
Device	This identifies a device installed in one of the ZyWALL’s extension slots or USB ports.
Information
System	This field displays the name used to identify the ZyWALL on any network. Click the icon to
Name	open the screen where you can change it.
Model Name	This field displays the model name of this ZyWALL.
Serial	This field displays the serial number of this ZyWALL. The serial number is used for device
Number	tracking and control.
MAC Address	This field displays the MAC addresses used by the ZyWALL. Each physical port has one
Range	MAC address. The first MAC address is assigned to physical port 1, the second MAC
	address is assigned to physical port 2, and so on.
Firmware	This field displays the version number and date of the firmware the ZyWALL is currently
Version	running. Click the icon to open the screen where you can upload firmware.
System Status
System	This field displays how long the ZyWALL has been running since it last restarted or was
Uptime	turned on.
Current	This field displays the current date and time in the ZyWALL. The format is yyyy-mm-dd
Date/Time	hh:mm:ss.
VPN Status	Click this to look at the VPN tunnels that are currently established. See Section 5.2.1 on
	page 74.
DHCP Table	Click this to look at the IP addresses currently assigned to the ZyWALL’s DHCP clients and
	the IP addresses reserved for specific MAC addresses. See Section 5.2.5 on page 77.
Current Login	This field displays the user name used to log in to the current session, the amount of
User	reauthentication time remaining, and the amount of lease time remaining.
Number of	This field displays the number of users currently logged in to the ZyWALL. Click the icon to
Login Users	pop-open a list of the users who are currently logged in to the ZyWALL.

	71
ZyWALL 110/310/1100 Series User’s Guide