ZyXEL Communications 110, 1100, 310 7.5 Cellular Configuration Screen (3G)

Chapter 7 Interfaces

Table 46 Configuration > Network > Interface > PPP > Add (continued)

LABEL	DESCRIPTION
Check this	Select this to specify a domain name or IP address for the connectivity check. Enter
address	that domain name or IP address in the field next to it.
Check Port	This field only displays when you set the Check Method to tcp. Specify the port
	number to use for a TCP connectivity check.
Related Setting
Configure WAN	Click WAN TRUNK to go to a screen where you can configure the interface as part of a
TRUNK	WAN trunk for load balancing.
Policy Route	Click Policy Route to go to the screen where you can manually configure a policy
	route to associate traffic with this interface.
OK	Click OK to save your changes back to the ZyWALL.
Cancel	Click Cancel to exit this screen without saving.

7.5 Cellular Configuration Screen (3G)

3G (Third Generation) is a digital, packet-switched wireless technology. Bandwidth usage is optimized as multiple users share the same channel and bandwidth is only allocated to users when they send data. It allows fast transfer of voice and non-voice data and provides broadband Internet access to mobile devices.

Note: The actual data rate you obtain varies depending on the 3G device you use, the signal strength to the service provider’s base station, and so on.

You can configure how the ZyWALL’s 3G device connects to a network (refer to Section 7.5.1 on page 134):

•You can set the 3G device to connect only to the home network, which is the network to which you are originally subscribed.

•You can set the 3G device to connect to other networks if the signal strength of the home network is too low or it is unavailable.

132
	ZyWALL 110/310/1100 Series User’s Guide