Chapter 7 Interfaces

Figure 84 Configuration > Network > Interface > Cellular

The following table describes the labels in this screen.

Table 48 Configuration > Network > Interface > Cellular

LABEL

DESCRIPTION

Add

Click this to create a new cellular interface.

 

 

Edit

Double-click an entry or select it and click Edit to open a screen where you can modify

 

the entry’s settings.

 

 

Remove

To remove an entry, select it and click Remove. The ZyWALL confirms you want to

 

remove it before doing so.

 

 

Activate

To turn on an entry, select it and click Activate.

 

 

Inactivate

To turn off an entry, select it and click Inactivate.

 

 

Connect

To connect an interface, select it and click Connect. You might use this in testing the

 

interface or to manually establish the connection.

 

 

Disconnect

To disconnect an interface, select it and click Disconnect. You might use this in testing

 

the interface.

 

 

Object

Select an entry and click Object Reference to open a screen that shows which settings

References

use the entry. See Section 7.3.2 on page 122 for an example.

 

 

#

This field is a sequential value, and it is not associated with any interface.

 

 

Status

The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is

 

inactive.

 

The connect icon is lit when the interface is connected and dimmed when it is

 

disconnected.

 

 

Name

This field displays the name of the interface.

 

 

Extension Slot

This field displays where the entry’s cellular card is located.

 

 

Connected

This field displays the name of the cellular card.

Device

 

 

 

ISP Settings

This field displays the profile of ISP settings that this cellular interface is set to use.

 

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to return the screen to its last-saved settings.

 

 

7.5.1 Cellular Add/Edit Screen

To change your 3G settings, click Configuration > Network > Interface > Cellular > Add (or Edit). In the pop-up window that displays, select the slot that contains the 3G device, then the following screen displays.

134

 

ZyWALL 110/310/1100 Series User’s Guide