ZyXEL Communications 110, 1100, 310 37.5Console Port Speed, Apply, Apply, Apply, Reset, Status, Console, Time Zone, Time Zone Setup, Enable Daylight Saving, 1Click System > Date/Time

Chapter 37 System

7Click Apply.

To get the ZyWALL date and time from a time server

1Click System > Date/Time.

2Select Get from Time Server under Time and Date Setup.

3Under Time Zone Setup, select your Time Zone from the list.

4As an option you can select the Enable Daylight Saving check box to adjust the ZyWALL clock for daylight savings.

5Under Time and Date Setup, enter a Time Server Address (Table 177 on page 448).

6Click Apply.

37.5Console Port Speed

This section shows you how to set the console port speed when you connect to the ZyWALL via the console port using a terminal emulation program. See Table 2 on page 20 for default console port settings.

Click Configuration > System > Console Speed to open the Console Speed screen.

Figure 297 Configuration > System > Console Speed

The following table describes the labels in this screen.

Table 178 Configuration > System > Console Speed

LABEL	DESCRIPTION
Console Port Speed	Use the drop-down list box to change the speed of the console port. Your ZyWALL
	supports 9600, 19200, 38400, 57600, and 115200 bps (default) for the console port.
	The Console Port Speed applies to a console port connection using terminal emulation
	software and NOT the Console in the ZyWALL Web Configurator Status screen.
Apply	Click Apply to save your changes back to the ZyWALL.
Reset	Click Reset to return the screen to its last-saved settings.

	449
ZyWALL 110/310/1100 Series User’s Guide