ZyXEL Communications 110, 1100, 310 System Log, Active Log and Alert, When Full, Daily and When Full, and Weekly and When Full

Chapter 38 Log and Report

The following table describes the labels in this screen.

Table 196 Configuration > Log & Report > Log Setting > Edit (System Log)

LABEL	DESCRIPTION
E-Mail Server 1/2
Active	Select this to send log messages and alerts according to the information in this
	section. You specify what kinds of log messages are included in log information and
	what kinds of log messages are included in alerts in the Active Log and Alert
	section.
Mail Server	Type the name or IP address of the outgoing SMTP server.
Mail Subject	Type the subject line for the outgoing e-mail.
Send From	Type the e-mail address from which the outgoing e-mail is delivered. This address is
	used in replies.
Send Log To	Type the e-mail address to which the outgoing e-mail is delivered.
Send Alerts To	Type the e-mail address to which alerts are delivered.
Sending Log	Select how often log information is e-mailed. Choices are: When Full, Hourly and
	When Full, Daily and When Full, and Weekly and When Full.
Day for Sending	This field is available if the log is e-mailed weekly. Select the day of the week the log
Log	is e-mailed.
Time for Sending	This field is available if the log is e-mailed weekly or daily. Select the time of day
Log	(hours and minutes) when the log is e-mailed. Use 24-hour notation.
SMTP	Select this check box if it is necessary to provide a user name and password to the
Authentication	SMTP server.
User Name	This box is effective when you select the SMTP Authentication check box. Type the
	user name to provide to the SMTP server when the log is e-mailed.
Password	This box is effective when you select the SMTP Authentication check box. Type the
	password to provide to the SMTP server when the log is e-mailed.
Retype to Confirm	Type the password again to make sure that you have entered is correctly.
Active Log and Alert
System Log	Use the System Log drop-down list to change the log settings for all of the log
	categories.
	disable all logs (red X) - do not log any information for any category for the system
	log or e-mail any logs to e-mail server 1 or 2.
	enable normal logs (green check mark) - create log messages and alerts for all
	categories for the system log. If e-mail server 1 or 2 also has normal logs enabled,
	the ZyWALL will e-mail logs to them.
	enable normal logs and debug logs (yellow check mark) - create log messages,
	alerts, and debugging information for all categories. The ZyWALL does not e-mail
	debugging information, even if this setting is selected.
E-mail Server 1	Use the E-Mail Server 1 drop-down list to change the settings for e-mailing logs to
	e-mail server 1 for all log categories.
	Using the System Log drop-down list to disable all logs overrides your e-mail server
	1 settings.
	enable normal logs (green check mark) - e-mail log messages for all categories to
	e-mail server 1.
	enable alert logs (red exclamation point) - e-mail alerts for all categories to e-mail
	server 1.

490
	ZyWALL 110/310/1100 Series User’s Guide