ZyXEL Communications 110, 1100, 310 manual 41

Chapter 3 Hardware Introduction

3.5.1 Rear Panels

The following graphic shows the rear panel of the ZyWALL.

110

310

1100

Table 11 Rear Panel

LABEL	DESCRIPTION
Console	You can use the console port to manage the ZyWALL using CLI commands. You will be
	prompted to enter your user name and password. See the Command Reference Guide for
	more information about the CLI.
	When configuring using the console port, you need a computer equipped with
	communications software configured to the following parameters:
	•	Speed 115200 bps
	•	Data Bits 8
	•	Parity None
	•	Stop Bit 1
	•	Flow Control Off
CF Card Slot	Insert a compact flash card into this slot to store ZyWALL system logs.
Power	Use the included power cord to connect the power socket to a power outlet. Turn the power
	switch on if your ZyWALL has a power switch.
Lock	Attach a lock-and-cable from the Kensington lock (the small, metal-reinforced, oval hole)
	to a permanent object, such as a pole, to secure the ZyWALL in place.
Fan	The fans are for cooling the ZyWALL. Make sure they are not obstructed to allow maximum
	ventilation.

	41
ZyWALL 110/310/1100 Series User’s Guide