ZyXEL Communications 110, 1100, 310 n/a, force, Activate, Inactivate, unnecessary

Chapter 18 Authentication Policy

Table 95 Configuration > Auth. Policy (continued)

LABEL	DESCRIPTION
Authentication	Use this table to manage the ZyWALL’s list of authentication policies.
Policy Summary
Add	Click this to create a new entry. Select an entry and click Add to create a new entry after
	the selected entry.
Edit	Double-click an entry or select it and click Edit to open a screen where you can modify the
	entry’s settings.
Remove	To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove
	it before doing so.
Activate	To turn on an entry, select it and click Activate.
Inactivate	To turn off an entry, select it and click Inactivate.
Move	To move an entry to a different number in the list, click the Move icon. In the field that
	appears, specify the number to which you want to move the interface.
Status	This icon is lit when the entry is active and dimmed when the entry is inactive.
Priority	This is the position of the authentication policy in the list. The priority is important as the
	policies are applied in order of priority. Default displays for the default authentication
	policy that the ZyWALL uses on traffic that does not match any exceptional service or other
	authentication policy. You can edit the default rule but not delete it.
Source	This displays the source address object to which this policy applies.
Destination	This displays the destination address object to which this policy applies.
Schedule	This field displays the schedule object that dictates when the policy applies. none means
	the policy is active at all times if enabled.
Authentication	This field displays the authentication requirement for users when their traffic matches this
	policy. This is n/a for the default policy.
	unnecessary - Users do not need to be authenticated.
	required - Users need to be authenticated. They must manually go to the login screen.
	The ZyWALL will not redirect them to the login screen.
	force - Users need to be authenticated. The ZyWALL automatically displays the login
	screen whenever it routes HTTP traffic for users who have not logged in yet.
Description	If the entry has a description configured, it displays here.
Apply	Click this button to save your changes to the ZyWALL.
Reset	Click this button to return the screen to its last-saved settings.

18.2.1 Creating/Editing an Authentication Policy

Click Configuration > Auth. Policy and then the Add (or Edit) icon to open the Endpoint Security Edit screen. Use this screen to configure an authentication policy.

256
	ZyWALL 110/310/1100 Series User’s Guide