ZyXEL Communications 110, 1100, 310 Add, Edit, Service Group, Service Group Add/Edit, Service Group Add/Edit

Chapter 29 Services

Table 148 Configuration > Object > Service > Service Group (continued)

LABEL	DESCRIPTION
Family	This field displays the Server Group supported type, which is according to your
	configurations in the Service Group Add/Edit screen.
	There are 3 types of families:
	•	: Supports IPv4 only
	•	: Supports IPv6 only
	•	: Supports both IPv4 and IPv6
Name	This field displays the name of each service group.
	By default, the ZyWALL uses services starting with “Default_Allow_” in the firewall rules to
	allow certain services to connect to the ZyWALL.
Description	This field displays the description of each service group, if any.

29.3.1 The Service Group Add/Edit Screen

The Service Group Add/Edit screen allows you to create a new service group or edit an existing one. To access this screen, go to the Service Group screen (see Section 29.3 on page 393), and click either the Add icon or an Edit icon.

Figure 259 Configuration > Object > Service > Service Group > Edit

The following table describes the labels in this screen.

Table 149 Configuration > Object > Service > Service Group > Edit

LABEL	DESCRIPTION
Name	Enter the name of the service group. You may use 1-31 alphanumeric characters,
	underscores(_), or dashes (-), but the first character cannot be a number. This value is
	case-sensitive.
Description	Enter a description of the service group, if any. You can use up to 60 printable ASCII
	characters.

394
	ZyWALL 110/310/1100 Series User’s Guide