ZyXEL Communications 110, 1100, 310 Member, User/Leo, 1Click Configuration > Object > User/Group > Group. Click the Add icon

Chapter 18 Authentication Policy

18.3.2 Set Up User Groups

Set up the user groups and assign the users to the user groups.

1Click Configuration > Object > User/Group > Group. Click the Add icon.

2Enter the name of the group. In this example, it is “Finance”. Then, select User/Leo and click the right arrow to move him to the Member list. This example only has one member in this group, so click OK. Of course you could add more members later.

Figure 154 Configuration > Object > User/Group > Group > Add

3Repeat this process to set up the remaining user groups.

18.3.3Set Up User Authentication Using the RADIUS Server

This step sets up user authentication using the RADIUS server. First, configure the settings for the RADIUS server. Then, set up the authentication method, and configure the ZyWALL to use the authentication method. Finally, force users to log into the ZyWALL before it routes traffic for them.

1Click Configuration > Object > AAA Server > RADIUS. Double-click the radius entry. Configure the RADIUS server’s address, authentication port (1812 if you were not told otherwise), and key. Select case-sensitive if the RADIUS server checks user name casing. Click Apply.

	259
ZyWALL 110/310/1100 Series User’s Guide