Chapter 37 System

37.2 Host Name

A host name is the unique name by which a device is known on a network. Click Configuration > System > Host Name to open the Host Name screen.

Figure 293 Configuration > System > Host Name

The following table describes the labels in this screen.

Table 174 Configuration > System > Host Name

LABEL

DESCRIPTION

System Name

Enter a descriptive name to identify your ZyWALL device. This name can be up to 64

 

alphanumeric characters long. Spaces are not allowed, but dashes (-) underscores (_) and

 

periods (.) are accepted.

 

 

Domain Name

Enter the domain name (if you know it) here. This name is propagated to DHCP clients

 

connected to interfaces with the DHCP server enabled. This name can be up to 254

 

alphanumeric characters long. Spaces are not allowed, but dashes “-” are accepted.

 

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to return the screen to its last-saved settings.

 

 

37.3 USB Storage

The ZyWALL can use a connected USB device to store the system log and other diagnostic information. Use this screen to turn on this feature and set a disk full warning limit.

Note: Only connect one USB device. It must allow writing (it cannot be read-only) and use the FAT16, FAT32, EXT2, or EXT3 file system.

Click Configuration > System > USB Storage to open the screen as shown next.

444

 

ZyWALL 110/310/1100 Series User’s Guide