ZyXEL Communications 110, 1100, 310 Express, Rule Name, Site-to-site, Site-to-site, with Dynamic Peer, Remote Access (Server Role), Remote Access (Client Role)

Chapter 4 Quick Setup Wizards

4.3.3 VPN Express Wizard - Scenario

Click the Express radio button as shown in Figure 31 on page 49 to display the following screen.

Figure 32 VPN Express Wizard: Scenario

Rule Name: Type the name used to identify this VPN connection (and VPN gateway). You may use 1-31 alphanumeric characters, underscores (_), or dashes (-), but the first character cannot be a number. This value is case-sensitive.

Select the scenario that best describes your intended VPN connection. The figure on the left of the screen changes to match the scenario you select.

•Site-to-site- The remote IPSec device has a static IP address or a domain name. This ZyWALL can initiate the VPN tunnel.

•Site-to-site with Dynamic Peer - The remote IPSec device has a dynamic IP address. Only the remote IPSec device can initiate the VPN tunnel.

•Remote Access (Server Role) - Allow incoming connections from IPSec VPN clients. The clients have dynamic IP addresses and are also known as dial-in users. Only the clients can initiate the VPN tunnel.

•Remote Access (Client Role) - Connect to an IPSec server. This ZyWALL is the client (dial-in user) and can initiate the VPN tunnel.

50
	ZyWALL 110/310/1100 Series User’s Guide