ZyXEL Communications 110, 1100, 310 manual 493

Chapter 38 Log and Report

The following table describes the labels in this screen.

Table 197 Configuration > Log & Report > Log Setting > Edit (USB Storage)

LABEL	DESCRIPTION
Duplicate logs to	Select this to have the ZyWALL save a copy of its system logs to a connected USB storage
USB storage (if	device. Use the Active Log section to specify what kinds of messages to include.
ready)
Active Log
Selection	Use the Selection drop-down list to change the log settings for all of the log categories.
	disable all logs (red X) - do not send the remote server logs for any log category.
	enable normal logs (green check mark) - send the remote server log messages and
	alerts for all log categories.
	enable normal logs and debug logs (yellow check mark) - send the remote server log
	messages, alerts, and debugging information for all log categories.
#	This field is a sequential value, and it is not associated with a specific entry.
Log Category	This field displays each category of messages. The Default category includes debugging
	messages generated by open source software.
Selection	Select what information you want to log from each Log Category (except All Logs; see
	below). Choices are:
	disable all logs (red X) - do not log any information from this category
	enable normal logs (green check mark) - log regular information and alerts from this
	category
	enable normal logs and debug logs (yellow check mark) - log regular information,
	alerts, and debugging information from this category
OK	Click this to save your changes and return to the previous screen.
Cancel	Click this to return to the previous screen without saving your changes.

38.3.4 Edit Remote Server Log Settings

The Log Settings Edit screen controls the detailed settings for each log in the remote server (syslog). Go to the Log Settings Summary screen (see Section 38.3.1 on page 487), and click a remote server Edit icon.

	493
ZyWALL 110/310/1100 Series User’s Guide