Chapter 4 Quick Setup Wizards

Figure 43 VPN for Configuration Provisioning Express Wizard: Configuration

•Secure Gateway: Any displays in this field because it is not configurable in this wizard. It allows incoming connections from the ZyWALL IPSec VPN Client.

•Pre-Shared Key: Type the password. Both ends of the VPN tunnel must use the same password. Use 8 to 31 case-sensitive ASCII characters or 8 to 31 pairs of hexadecimal (“0-9”, “A-F”) characters. Proceed a hexadecimal key with “0x”. You will receive a PYLD_MALFORMED (payload malformed) packet if the same pre-shared key is not used on both ends.

•Local Policy (IP/Mask): Type the IP address of a computer on your network. You can also specify a subnet. This must match the remote IP address configured on the remote IPSec device.

•Remote Policy (IP/Mask): Any displays in this field because it is not configurable in this wizard.

4.4.3VPN Settings for Configuration Provisioning Express Wizard - Summary

This screen has a read-only summary of the VPN tunnel’s configuration and commands you can copy and paste into another ZLD-based ZyWALL’s command line interface to configure it.

 

61

ZyWALL 110/310/1100 Series User’s Guide