Chapter 37 System

37.10 FTP

You can upload and download the ZyWALL’s firmware and configuration files using FTP. To use this feature, your computer must have an FTP client. Please see Chapter 39 on page 499 for more information about firmware and configuration files.

37.10.1 Configuring FTP

To change your ZyWALL’s FTP settings, click Configuration > System > FTP tab. The screen appears as shown. Use this screen to specify from which zones FTP can be used to access the ZyWALL. You can also specify from which IP addresses the access can come.

Figure 331 Configuration > System > FTP

The following table describes the labels in this screen.

Table 189 Configuration > System > FTP

LABEL

DESCRIPTION

Enable

Select the check box to allow or disallow the computer with the IP address that matches

 

the IP address(es) in the Service Control table to access the ZyWALL using this service.

 

 

TLS required

Select the check box to use FTP over TLS (Transport Layer Security) to encrypt

 

communication.

 

This implements TLS as a security mechanism to secure FTP clients and/or servers.

 

 

Server Port

You may change the server port number for a service if needed, however you must use the

 

same port number in order to use that service for remote management.

 

 

Server

Select the certificate whose corresponding private key is to be used to identify the ZyWALL

Certificate

for FTP connections. You must have certificates already configured in the My Certificates

 

screen (Click My Certificates and see Chapter 33 on page 413 for details).

 

 

Service Control

This specifies from which computers you can access which ZyWALL zones.

 

 

Add

Click this to create a new entry. Select an entry and click Add to create a new entry after

 

the selected entry. Refer to Table 185 on page 461 for details on the screen that opens.

 

 

Edit

Double-click an entry or select it and click Edit to be able to modify the entry’s settings.

 

 

478

 

ZyWALL 110/310/1100 Series User’s Guide