ZyXEL Communications 110, 1100, 310 Add, Edit, Apply, Reset, (allow), Firewall, Firewall Rule Edit

Chapter 19 Firewall

Table 98 Configuration > Firewall (continued)

LABEL	DESCRIPTION
Schedule	This field tells you the schedule object that the rule uses. none means the rule is active at
	all times if enabled.
User	This is the user name or user group name to which this firewall rule applies.
IPv4 / IPv6	This displays the IPv4 or IPv6 source address object to which this firewall rule applies.
Source
IPv4 / IPv6	This displays the IPv4 or IPv6 destination address object to which this firewall rule applies.
Destination
Service	This displays the service object to which this firewall rule applies.
Access	This field displays whether the firewall silently discards packets (deny), discards packets
	and sends a TCP reset packet to the sender (reject) or permits the passage of packets
	(allow).
Log	This field shows you whether a log (and alert) is created when packets match this rule or
	not.
Apply	Click Apply to save your changes back to the ZyWALL.
Reset	Click Reset to return the screen to its last-saved settings.

19.2.2 The Firewall Add/Edit Screen

In the Firewall screen, click the Edit or Add icon to display the Firewall Rule Edit screen. Figure 164 Configuration > Firewall > Add

The following table describes the labels in this screen.

Table 99 Configuration > Firewall > Add

LABEL	DESCRIPTION
Create new	Use to configure any new settings objects that you need to use in this screen.
Object
Enable	Select this check box to activate the firewall rule.

272
	ZyWALL 110/310/1100 Series User’s Guide