Chapter 29 Services

The following table describes the labels in this screen.

Table 146 Configuration > Object > Service > Service

LABEL

DESCRIPTION

Add

Click this to create a new entry.

 

 

Edit

Double-click an entry or select it and click Edit to be able to modify the entry’s settings.

 

 

Remove

To remove an entry, select it and click Remove. The ZyWALL confirms you want to

 

remove it before doing so.

 

 

Object

Select an entry and click Object References to open a screen that shows which settings

References

use the entry. See Section 7.3.2 on page 122 for an example.

 

 

#

This field is a sequential value, and it is not associated with a specific service.

 

 

Name

This field displays the name of each service.

 

 

Content

This field displays a description of each service.

 

 

29.2.1 The Service Add/Edit Screen

The Service Add/Edit screen allows you to create a new service or edit an existing one. To access this screen, go to the Service screen (see Section 29.2 on page 391), and click either the Add icon or an Edit icon.

Figure 257 Configuration > Object > Service > Service > Edit

The following table describes the labels in this screen.

Table 147 Configuration > Object > Service > Service > Edit

LABEL

DESCRIPTION

Name

Type the name used to refer to the service. You may use 1-31 alphanumeric characters,

 

underscores(_), or dashes (-), but the first character cannot be a number. This value is

 

case-sensitive.

IP Protocol

Select the protocol the service uses. Choices are: TCP, UDP, ICMP, ICMPv6, and User

 

Defined.

 

 

Starting Port

This field appears if the IP Protocol is TCP or UDP. Specify the port number(s) used by

Ending Port

this service. If you fill in one of these fields, the service uses that port. If you fill in both

fields, the service uses the range of ports.

 

 

 

ICMP Type

This field appears if the IP Protocol is ICMP or ICMPv6.

 

Select the ICMP message used by this service. This field displays the message text, not

 

the message number.

 

 

IP Protocol

This field appears if the IP Protocol is User Defined.

Number

Enter the number of the next-level protocol (IP protocol). Allowed values are 1 - 255.

 

 

 

OK

Click OK to save your changes back to the ZyWALL.

 

 

Cancel

Click Cancel to exit this screen without saving your changes.

 

 

392

 

ZyWALL 110/310/1100 Series User’s Guide