Chapter 37 System

Figure 294 Configuration > System > USB Storage

The following table describes the labels in this screen.

Table 175 Configuration > System > USB Storage

LABEL

DESCRIPTION

Activate USB

Select this if you want to use the connected USB device(s).

storage service

 

 

 

Disk full warning

Set a number and select a unit (MB or %) to have the ZyWALL send a warning message

when remaining

when the remaining USB storage space is less than the value you set here.

space is less

 

than

 

 

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to return the screen to its last-saved settings.

 

 

37.4 Date and Time

For effective scheduling and logging, the ZyWALL system time must be accurate. The ZyWALL’s Real Time Chip (RTC) keeps track of the time and date. There is also a software mechanism to set the time manually or get the current time and date from an external server.

To change your ZyWALL’s time based on your local time zone and date, click Configuration > System > Date/Time. The screen displays as shown. You can manually set the ZyWALL’s time and date or have the ZyWALL get the date and time from a time server.

 

445

ZyWALL 110/310/1100 Series User’s Guide