Chapter 7 Interfaces

 

 

 

 

 

Table 50 Network > Interface > Tunnel (continued)

 

LABEL

DESCRIPTION

 

 

Status

The activate (light bulb) icon is lit when the entry is active and dimmed when the entry

 

 

 

is inactive.

 

 

 

 

 

 

Name

This field displays the name of the interface.

 

 

 

 

 

 

IP Address

This is the IP address of the interface. If the interface is active (and connected), the

 

 

 

ZyWALL tunnels local traffic sent to this IP address to the Remote Gateway Address.

 

 

 

 

 

 

Tunnel Mode

This is the tunnel mode of the interface (GRE, IPv6-in-IPv4or 6to4). This field also

 

 

 

displays the interface’s IPv4 IP address and subnet mask if it is a GRE tunnel.

 

 

 

Otherwise, it displays the interface’s IPv6 IP address and prefix length.

 

 

 

 

 

 

My Address

This is the interface or IP address uses to identify itself to the remote gateway. The

 

 

 

ZyWALL uses this as the source for the packets it tunnels to the remote gateway.

 

 

 

 

 

 

Remote Gateway

This is the IP address or domain name of the remote gateway to which this interface

 

 

Address

tunnels traffic.

 

 

 

 

 

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

 

 

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

 

 

 

7.6.2 Tunnel Add or Edit Screen

This screen lets you configure a tunnel interface. Click Configuration > Network > Interface > Tunnel > Add (or Edit) to open the following screen.

 

143

ZyWALL 110/310/1100 Series User’s Guide