Chapter 34 ISP Accounts

 

 

 

 

Table 167 Configuration > Object > ISP Account > Edit (continued)

 

LABEL

DESCRIPTION

 

Authentication

Use the drop-down list box to select an authentication protocol for outgoing calls. Options

 

Type

are:

 

 

CHAP/PAP - Your ZyWALL accepts either CHAP or PAP when requested by this remote

 

 

node.

 

 

Chap - Your ZyWALL accepts CHAP only.

 

 

PAP - Your ZyWALL accepts PAP only.

 

 

MSCHAP - Your ZyWALL accepts MSCHAP only.

 

 

MSCHAP-V2- Your ZyWALL accepts MSCHAP-V2 only.

 

 

 

 

Encryption

This field is available if this ISP account uses the PPTP protocol. Use the drop-down list

 

Method

box to select the type of Microsoft Point-to-Point Encryption (MPPE). Options are:

 

 

nomppe - This ISP account does not use MPPE.

 

 

mppe-40- This ISP account uses 40-bit MPPE.

 

 

mppe-128- This ISP account uses 128-bit MMPE.

 

 

 

 

User Name

Type the user name given to you by your ISP.

 

 

 

 

Password

Type the password associated with the user name above. The password can only consist of

 

 

alphanumeric characters (A-Z, a-z, 0-9). This field can be blank.

 

 

 

 

Retype to

Type your password again to make sure that you have entered is correctly.

 

Confirm

 

 

 

 

 

Server IP

If this ISP account uses the PPPoE protocol, this field is not displayed.

 

 

If this ISP account uses the PPTP protocol, type the IP address of the PPTP server.

 

 

 

 

Connection ID

This field is available if this ISP account uses the PPTP protocol. Type your identification

 

 

name for the PPTP server. This field can be blank.

 

 

 

 

Service Name

If this ISP account uses the PPPoE protocol, type the PPPoE service name to access. PPPoE

 

 

uses the specified service name to identify and reach the PPPoE server. This field can be

 

 

blank.

 

 

If this ISP account uses the PPTP protocol, this field is not displayed.

 

 

 

 

Compression

Select On button to turn on stac compression, and select Off to turn off stac compression.

 

 

Stac compression is a data compression technique capable of compressing data by a factor

 

 

of about four.

 

 

 

 

Idle Timeout

This value specifies the number of seconds that must elapse without outbound traffic

 

 

before the ZyWALL automatically disconnects from the PPPoE/PPTP server. This value must

 

 

be an integer between 0 and 360. If this value is zero, this timeout is disabled.

 

 

 

 

OK

Click OK to save your changes back to the ZyWALL. If there are no errors, the program

 

 

returns to the ISP Account screen. If there are errors, a message box explains the error,

 

 

and the program stays in the ISP Account Edit screen.

 

 

 

 

Cancel

Click Cancel to return to the ISP Account screen without creating the profile (if it is new)

 

 

or saving any changes to the profile (if it already exists).

 

 

 

 

431

ZyWALL 110/310/1100 Series User’s Guide