ZyXEL Communications 110, 1100, 310 21.3 The SSL Global Setting Screen, Objects, Selectable, Access Privilege

Chapter 21 SSL VPN

Table 118 VPN > SSL VPN > Access Privilege > Add/Edit (continued)

LABEL	DESCRIPTION
Network List	To allow user access to local network(s), select a network name in the Selectable
	Address Objects list and click the right arrow button to add to the Selected Address
	Objects list. You can select more than one network.
	To block access to a network, select the network name in the Selected Address Objects
	list and click the left arrow button.
OK	Click OK to save the changes and return to the main Access Privilege screen.
Cancel	Click Cancel to discard all changes and return to the main Access Privilege screen.

21.3 The SSL Global Setting Screen

Click VPN > SSL VPN and click the Global Setting tab to display the following screen. Use this screen to set the IP address of the ZyWALL (or a gateway device) on your network for full tunnel mode access, enter access messages or upload a custom logo to be displayed on the remote user screen.

Figure 197 VPN > SSL VPN > Global Setting

The following table describes the labels in this screen.

Table 119 VPN > SSL VPN > Global Setting

LABEL	DESCRIPTION
Global Setting
Network	Specify the IP address of the ZyWALL (or a gateway device) for full tunnel mode SSL VPN
Extension Local	access.
IP	Leave this field to the default settings unless it conflicts with another interface.
SSL VPN Login Domain Name

322
	ZyWALL 110/310/1100 Series User’s Guide