ZyXEL Communications 110, 1100, 310 37.11 SNMP

	Chapter 37 System
Table 189 Configuration > System > FTP (continued)
LABEL	DESCRIPTION
Remove	To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove
	it before doing so. Note that subsequent entries move up by one when you take this action.
Move	To change an entry’s position in the numbered list, select the method and click Move to
	display a field to type a number for where you want to put it and press [ENTER] to move
	the rule to the number that you typed.
#	This the index number of the service control rule.
	The entry with a hyphen (-) instead of a number is the ZyWALL’s (non-configurable)
	default policy. The ZyWALL applies this to traffic that does not match any other configured
	rule. It is not an editable rule. To apply other behavior, configure a rule that traffic will
	match so the ZyWALL will not have to use the default policy.
Zone	This is the zone on the ZyWALL the user is allowed or denied to access.
Address	This is the object name of the IP address(es) with which the computer is allowed or denied
	to access.
Action	This displays whether the computer with the IP address specified above can access the
	ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).
Apply	Click Apply to save your changes back to the ZyWALL.
Reset	Click Reset to return the screen to its last-saved settings.

37.11 SNMP

Simple Network Management Protocol is a protocol used for exchanging management information between network devices. Your ZyWALL supports SNMP agent functionality, which allows a manager station to manage and monitor the ZyWALL through the network. The ZyWALL supports SNMP version one (SNMPv1) and version two (SNMPv2c). The next figure illustrates an SNMP management operation.

	479
ZyWALL 110/310/1100 Series User’s Guide