Chapter 20 IPSec VPN

Figure 185 Configuration > VPN > IPSec VPN > Concentrator > Edit

Each field is described in the following table.

Table 112 VPN > IPSec VPN > Concentrator > Edit

LABEL

DESCRIPTION

Name

Enter the name of the concentrator. You may use 1-31 alphanumeric characters, underscores(_),

 

or dashes (-), but the first character cannot be a number. This value is case-sensitive.

Member

Select the concentrator’s IPSec VPN connection policies.

 

Note: You must disable policy enforcement in each member. See Section 20.2.1 on page 286.

 

IPSec VPN connection policies that do not belong to a VPN concentrator appear under Available.

 

Select any VPN connection policies that you want to add to the VPN concentrator and click the

 

right arrow button to add them.

 

The VPN concentrator’s member VPN connections appear under Member. Select any VPN

 

connections that you want to remove from the VPN concentrator, and click the left arrow button

 

to remove them.

 

 

OK

Click OK to save your changes in the ZyWALL.

 

 

Cancel

Click Cancel to exit this screen without saving.

 

 

20.5 ZyWALL IPSec VPN Client Configuration Provisioning

Use the Configuration > VPN > IPSec VPN > Configuration Provisioning screen to configure who can retrieve VPN rule settings from the ZyWALL using the ZyWALL IPSec VPN Client. In the ZyWALL IPSec VPN Client, you just need to enter the IP address of the ZyWALL to get all the VPN rule settings automatically. You do not need to manually configure all rule settings in the ZyWALL IPSec VPN client.

VPN rules for the ZyWALL IPSec VPN Client have certain restrictions. They must not contain the following settings:

•AH active protocol

•NULL encryption

•SHA512 authentication

•A subnet or range remote policy

 

303

ZyWALL 110/310/1100 Series User’s Guide