ZyXEL Communications 110, 1100, 310 Add, DHCPv6 Server, DHCPv6 Client, DHCPv6 Setting, DHCPv6 Lease Options, DHCPv6 Request Options, Configuration > Network > Interface > Ethernet > Edit

Chapter 7 Interfaces

Figure 78 Object References

The following table describes labels that can appear in this screen.

Table 42 Object References

LABEL	DESCRIPTION
Object Name	This identifies the object for which the configuration settings that use it are displayed.
	Click the object’s name to display the object’s configuration screen in the main window.
#	This field is a sequential value, and it is not associated with any entry.
Service	This is the type of setting that references the selected object. Click a service’s name to
	display the service’s configuration screen in the main window.
Priority	If it is applicable, this field lists the referencing configuration item’s position in its list,
	otherwise N/A displays.
Name	This field identifies the configuration item that references the object.
Description	If the referencing configuration item has a description configured, it displays here.
Refresh	Click this to update the information in this screen.
Cancel	Click Cancel to close the screen.

7.3.3 Add/Edit DHCPv6 Request/Release Options

When you configure an interface as a DHCPv6 server or client, you can additionally add DHCPv6 request or lease options which have the ZyWALL to add more information in the DHCPv6 packets. To open the screen, click Configuration > Network > Interface > Ethernet > Edit, select DHCPv6 Server or DHCPv6 Client in the DHCPv6 Setting section, and then click Add in the DHCPv6 Request Options or DHCPv6 Lease Options table.

Figure 79 Configuration > Network > Interface > Ethernet > Edit > Add DHCPv6 Request/Lease Options

	123
ZyWALL 110/310/1100 Series User’s Guide