Chapter 14 HTTP Redirect

Figure 133 Configuration > Network > HTTP Redirect

The following table describes the labels in this screen.

Table 85 Configuration > Network > HTTP Redirect

LABEL

DESCRIPTION

Add

Click this to create a new entry.

 

 

Edit

Double-click an entry or select it and click Edit to open a screen where you can modify

 

the entry’s settings.

 

 

Remove

To remove an entry, select it and click Remove. The ZyWALL confirms you want to

 

remove it before doing so.

 

 

Activate

To turn on an entry, select it and click Activate.

 

 

Inactivate

To turn off an entry, select it and click Inactivate.

 

 

#

This field is a sequential value, and it is not associated with a specific entry.

 

 

Status

This icon is lit when the entry is active and dimmed when the entry is inactive.

 

 

Name

This is the descriptive name of a rule.

 

 

Interface

This is the interface on which the request must be received.

 

 

Proxy Server

This is the IP address of the proxy server.

 

 

Port

This is the service port number used by the proxy server.

 

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to return the screen to its last-saved settings.

 

 

14.2.1 The HTTP Redirect Edit Screen

Click Network > HTTP Redirect to open the HTTP Redirect screen. Then click the Add or Edit icon to open the HTTP Redirect Edit screen where you can configure the rule.

Figure 134 Network > HTTP Redirect > Edit

 

231

ZyWALL 110/310/1100 Series User’s Guide