Chapter 28 Addresses

Table 141 Configuration > Object > Address > Address (continued)

LABEL

DESCRIPTION

Type

This field displays the type of each address object. “INTERFACE” means the object uses

 

the settings of one of the ZyWALL’s interfaces.

 

 

IPv6 Address

This field displays the IPv6 addresses represented by each address object. If the object’s

 

settings are based on one of the ZyWALL’s interfaces, the name of the interface displays

 

first followed by the object’s current address settings.

 

 

28.2.1 IPv4 Address Add/Edit Screen

The Configuration > IPv4 Address Add/Edit screen allows you to create a new address or edit an existing one. To access this screen, go to the Address screen (see Section 28.2 on page 384), and click either the Add icon or an Edit icon in the IPv4 Address Configuration section.

Figure 252 IPv4 Address Configuration > Add/Edit

The following table describes the labels in this screen.

Table 142 IPv4 Address Configuration > Add/Edit

LABEL

DESCRIPTION

Name

Type the name used to refer to the address. You may use 1-31 alphanumeric characters,

 

underscores(_), or dashes (-), but the first character cannot be a number. This value is

 

case-sensitive.

Address Type

Select the type of address you want to create. Choices are: HOST, RANGE, SUBNET,

 

INTERFACE IP, INTERFACE SUBNET, and INTERFACE GATEWAY.

 

Note: The ZyWALL automatically updates address objects that are based on an interface’s

 

IP address, subnet, or gateway if the interface’s IP address settings change. For

 

example, if you change 1’s IP address, the ZyWALL automatically updates the

 

corresponding interface-based, LAN subnet address object.

 

 

IP Address

This field is only available if the Address Type is HOST. This field cannot be blank. Enter

 

the IP address that this address object represents.

 

 

Starting IP

This field is only available if the Address Type is RANGE. This field cannot be blank.

Address

Enter the beginning of the range of IP addresses that this address object represents.

 

 

Ending IP

This field is only available if the Address Type is RANGE. This field cannot be blank.

Address

Enter the end of the range of IP address that this address object represents.

 

 

Network

This field is only available if the Address Type is SUBNET, in which case this field cannot

 

be blank. Enter the IP address of the network that this address object represents.

 

 

Netmask

This field is only available if the Address Type is SUBNET, in which case this field cannot

 

be blank. Enter the subnet mask of the network that this address object represents. Use

 

dotted decimal format.

 

 

Interface

If you selected INTERFACE IP, INTERFACE SUBNET, or INTERFACE GATEWAY as the

 

Address Type, use this field to select the interface of the network that this address object

 

represents.

 

 

386

 

ZyWALL 110/310/1100 Series User’s Guide