ZyXEL Communications 110, 1100, 310 6.5 The Session Monitor Screen, Session Monitor

Chapter 6 Monitor

The following table displays the maximum number of records shown in the report, the byte count limit, and the hit count limit.

Table 25 Maximum Values for Reports

LABEL	DESCRIPTION
Maximum Number of Records	20
Byte Count Limit	264 bytes; this is just less than 17 million terabytes.
Hit Count Limit	264 hits; this is over 1.8 x 1019 hits.

6.5 The Session Monitor Screen

The Session Monitor screen displays all established sessions that pass through the ZyWALL for debugging or statistical analysis. It is not possible to manage sessions in this screen. The following information is displayed.

•User who started the session

•Protocol or service port used

•Source address

•Destination address

•Number of bytes received (so far)

•Number of bytes transmitted (so far)

•Duration (so far)

You can look at all established sessions that passed through the ZyWALL by user, service, source IP address, or destination IP address. You can also filter the information by user, protocol / service or service group, source address, and/or destination address and view it by user.

Click Monitor > System Status > Session Monitor to display the following screen.

Figure 62 Monitor > System Status > Session Monitor

	89
ZyWALL 110/310/1100 Series User’s Guide