Chapter 6 Monitor

Table 32 Monitor > System Status > USB Storage (continued)

LABEL

DESCRIPTION

Status

Ready - you can have the ZyWALL use the USB storage device.

 

Click Remove Now to stop the ZyWALL from using the USB storage device so you

 

can remove it.

 

Unused - the connected USB storage device was manually unmounted by using

 

the Remove Now button or for some reason the ZyWALL cannot mount it.

 

Click Use It to have the ZyWALL mount a connected USB storage device. This

 

button is grayed out if the file system is not supported (unknown) by the ZyWALL.

 

none - no USB storage device is connected.

 

 

Detail

This field displays any other information the ZyWALL retrieves from the USB

 

storage device.

 

Deactivated - the use of a USB storage device is disabled (turned off) on the

 

ZyWALL.

 

OutofSpace - the available disk space is less than the disk space full threshold

 

(see Section 37.2 on page 444 for how to configure this threshold).

 

Mounting - the ZyWALL is mounting the USB storage device.

 

Removing - the ZyWALL is unmounting the USB storage device.

 

none - the USB device is operating normally or not connected.

 

 

6.11 The IPSec Monitor Screen

You can use the IPSec Monitor screen to display and to manage active IPSec To access this screen, click Monitor > VPN Monitor > IPSec. The following screen appears. SAs. Click a column’s heading cell to sort the table entries by that column’s criteria. Click the heading cell again to reverse the sort order.

Figure 69 Monitor > VPN Monitor > IPSec

 

97

ZyWALL 110/310/1100 Series User’s Guide