Chapter 28 Addresses

Table 142 IPv4 Address Configuration > Add/Edit (continued)

LABEL

DESCRIPTION

OK

Click OK to save your changes back to the ZyWALL.

 

 

Cancel

Click Cancel to exit this screen without saving your changes.

 

 

28.2.2 IPv6 Address Add/Edit Screen

The Configuration > IPv6 Address Add/Edit screen allows you to create a new address or edit an existing one. To access this screen, go to the Address screen (see Section 28.2 on page 384), and click either the Add icon or an Edit icon in the IPv6 Address Configuration section.

Figure 253 IPv6 Address Configuration > Add/Edit

The following table describes the labels in this screen.

Table 143 IPv6 Address Configuration > Add/Edit

LABEL

DESCRIPTION

Name

Type the name used to refer to the address. You may use 1-31 alphanumeric characters,

 

underscores(_), or dashes (-), but the first character cannot be a number. This value is

 

case-sensitive.

Object Type

Select the type of address you want to create. Choices are: HOST, RANGE, SUBNET,

 

INTERFACE IP, INTERFACE SUBNET, and INTERFACE GATEWAY.

 

Note: The ZyWALL automatically updates address objects that are based on an interface’s

 

IP address, subnet, or gateway if the interface’s IP address settings change. For

 

example, if you change 1’s IP address, the ZyWALL automatically updates the

 

corresponding interface-based, LAN subnet address object.

 

 

IPv6 Address

This field is only available if the Address Type is HOST. This field cannot be blank. Enter

 

the IP address that this address object represents.

 

 

IPv6 Starting

This field is only available if the Address Type is RANGE. This field cannot be blank.

Address

Enter the beginning of the range of IP addresses that this address object represents.

 

 

IPv6 Ending

This field is only available if the Address Type is RANGE. This field cannot be blank.

Address

Enter the end of the range of IP address that this address object represents.

 

 

IPv6 Address

This field is only available if the Address Type is SUBNET. This field cannot be blank.

Prefix

Enter the IPv6 address prefix that the ZyWALL uses for the LAN IPv6 address.

 

 

Interface

If you selected INTERFACE IP, INTERFACE SUBNET, or INTERFACE GATEWAY as the

 

Address Type, use this field to select the interface of the network that this address object

 

represents.

 

 

IPv6 Address

Select whether the IPv6 address is a link-local IP address (LINK LOCAL), static IP

Type

address (STATIC), an IPv6 StateLess Address Auto Configuration IP address (SLAAC), or

 

is obtained from a DHCPv6 server (DHCPv6).

 

 

OK

Click OK to save your changes back to the ZyWALL.

 

 

Cancel

Click Cancel to exit this screen without saving your changes.

 

 

 

387

ZyWALL 110/310/1100 Series User’s Guide