ZyXEL Communications 110, 1100, 310 manual 380

Chapter 27 User/Group

Table 137 Configuration > Object > User/Group > Setting (continued)

LABEL	DESCRIPTION
Maximum number per	This field is effective when Limit ... for access account is checked. Type
access account	the maximum number of simultaneous logins by each access user.
User Lockout Settings
Enable logon retry limit	Select this check box to set a limit on the number of times each user can
	login unsuccessfully (for example, wrong password) before the IP address is
	locked out for a specified amount of time.
Maximum retry count	This field is effective when Enable logon retry limit is checked. Type the
	maximum number of times each user can login unsuccessfully before the IP
	address is locked out for the specified lockout period. The number must be
	between 1 and 99.
Lockout period	This field is effective when Enable logon retry limit is checked. Type the
	number of minutes the user must wait to try to login again, if logon retry
	limit is enabled and the maximum retry count is reached. This number
	must be between 1 and 65,535 (about 45.5 days).
Apply	Click Apply to save the changes.
Reset	Click Reset to return the screen to its last-saved settings.

27.4.1 Default User Authentication Timeout Settings Edit Screens

The Default Authentication Timeout Settings Edit screen allows you to set the default authentication timeout settings for the selected type of user account. These default authentication timeout settings also control the settings for any existing user accounts that are set to use the default settings. You can still manually configure any user account’s authentication timeout settings.

To access this screen, go to the Configuration > Object > User/Group > Setting screen (see Section 27.4 on page 378), and click one of the Default Authentication Timeout Settings section’s Edit icons.

Figure 247 Configuration > Object > User/Group > Setting > Edit

380
	ZyWALL 110/310/1100 Series User’s Guide