Chapter 1 Introduction

Command-Line Interface (CLI)

The CLI allows you to use text-based commands to configure the ZyWALL. Access it using remote management (for example, SSH or Telnet) or via the physical or Web Configurator console port. See the Command Reference Guide for CLI details. The default settings for the console port are:

Table 2 Console Port Default Settings

SETTINGVALUE

Speed

115200 bps

 

 

Data Bits

8

 

 

Parity

None

 

 

Stop Bit

1

 

 

Flow Control

Off

 

 

1.3 Web Configurator

In order to use the Web Configurator, you must:

•Use one of the following web browser versions or later: Internet Explorer 7, Firefox 3.5, Chrome 9.0

•Allow pop-up windows (blocked by default in Windows XP Service Pack 2)

•Enable JavaScripts, Java permissions, and cookies

The recommended screen resolution is 1024 x 768 pixels.

1.3.1 Web Configurator Access

1Make sure your ZyWALL hardware is properly connected. See the Quick Start Guide.

2In your browser go to http://192.168.1.1. By default, the ZyWALL automatically routes this request to its HTTPS server, and it is recommended to keep this setting. The Login screen appears.

3Type the user name (default: “admin”) and password (default: “1234”).

If you have a OTP (One-Time Password) token generate a number and enter it in the One-Time Password field. The number is only good for one login. You must use the token to generate a new number the next time you log in.

20

 

ZyWALL 110/310/1100 Series User’s Guide