Chapter 6 Monitor

 

 

 

 

Table 23 Monitor > System Status > Interface Status (continued)

 

LABEL

DESCRIPTION

 

Status

The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is

 

 

inactive.

 

 

 

 

Zone

This field displays the zone to which the interface is assigned.

 

 

 

 

IP Address

This is the IP address of the interface. If the interface is active (and connected), the

 

 

ZyWALL tunnels local traffic sent to this IP address to the Remote Gateway Address.

 

 

 

 

My Address

This is the interface or IP address uses to identify itself to the remote gateway. The

 

 

ZyWALL uses this as the source for the packets it tunnels to the remote gateway.

 

 

 

 

Remote Gateway

This is the IP address or domain name of the remote gateway to which this interface

 

Address

tunnels traffic.

 

 

 

 

Mode

This field displays the tunnel mode that you are using.

 

 

 

 

Action

This field lists which services the interface provides to the network. This field displays n/a

 

 

if the interface does not provide any services to the network.

 

 

 

 

IPv6 Interface

This section displays the status of the IPv6 interface. If an Ethernet interface does not

 

Status

have any physical ports associated with it, its entry is displayed in light gray text.

 

 

 

 

Expand/Close

Click this button to show or hide statistics for all the virtual interfaces on top of the

 

 

Ethernet interfaces.

 

 

 

 

Name

This field displays the name of each interface. If there is an Expand icon (plus-sign) next

 

 

to the name, click this to look at the status of virtual interfaces on top of this interface.

 

 

 

 

Port

This field displays the physical port number.

 

 

 

 

Status

This field displays the current status of each interface. The possible values depend on what

 

 

type of interface it is.

 

 

For Ethernet interfaces:

 

 

Inactive - The Ethernet interface is disabled.

 

 

Down - The Ethernet interface is enabled but not connected.

 

 

Speed / Duplex - The Ethernet interface is enabled and connected. This field displays the

 

 

port speed and duplex setting (Full or Half).

 

 

For cellular (3G) interfaces, see Section 6.9 on page 93 the Web Help for the status that

 

 

can appear.

 

 

For virtual interfaces, this field always displays Up. If the virtual interface is disabled, it

 

 

does not appear in the list.

 

 

For VLAN and bridge interfaces, this field always displays Up. If the VLAN or bridge

 

 

interface is disabled, it does not appear in the list.

 

 

For PPP interfaces:

 

 

Connected - The PPP interface is connected.

 

 

Disconnected - The PPP interface is not connected.

 

 

If the PPP interface is disabled, it does not appear in the list.

 

 

 

 

HA Status

This field displays the status of the interface in the virtual router.

 

 

Active - This interface is the master interface in the virtual router.

 

 

Stand-By- This interface is a backup interface in the virtual router.

 

 

Fault - This VRRP group is not functioning in the virtual router right now. For example, this

 

 

might happen if the interface is down.

 

 

n/a - Device HA is not active on the interface.

 

 

 

 

Zone

This field displays the zone to which the interface is assigned.

 

 

 

 

85

ZyWALL 110/310/1100 Series User’s Guide