ZyXEL Communications 110, 1100, 310 DHCP Table, System Status

Chapter 5 Dashboard

The following table describes the labels in this screen.

Table 18 Dashboard > VPN Status

LABEL	DESCRIPTION
#	This field is a sequential value, and it is not associated with a specific SA.
Name	This field displays the name of the IPSec SA.
Encapsulation	This field displays how the IPSec SA is encapsulated.
Algorithm	This field displays the encryption and authentication algorithms used in the SA.
Refresh Interval	Select how often you want this window to be updated automatically.
Refresh	Click this to update the information in the window right away.

5.2.5 The DHCP Table Screen

Use this screen to look at the IP addresses currently assigned to DHCP clients and the IP addresses reserved for specific MAC addresses. To access this screen, click DHCP Table in System Status in the dashboard.

Figure 56 Dashboard > System Status >DHCP Table

The following table describes the labels in this screen.

Table 19 Dashboard > DHCP Table

LABEL	DESCRIPTION
#	This field is a sequential value, and it is not associated with a specific entry.
Interface	This field identifies the interface that assigned an IP address to a DHCP client.
IP Address	This field displays the IP address currently assigned to a DHCP client or reserved for a specific
	MAC address. Click the column’s heading cell to sort the table entries by IP address. Click the
	heading cell again to reverse the sort order.
Host Name	This field displays the name used to identify this device on the network (the computer name).
	The ZyWALL learns these from the DHCP client requests. “None” shows here for a static DHCP
	entry.
MAC Address	This field displays the MAC address to which the IP address is currently assigned or for which
	the IP address is reserved. Click the column’s heading cell to sort the table entries by MAC
	address. Click the heading cell again to reverse the sort order.
Description	For a static DHCP entry, the host name or the description you configured shows here. This field
	is blank for dynamic DHCP entries.
Reserve	If this field is selected, this entry is a static DHCP entry. The IP address is reserved for the MAC
	address.
	If this field is clear, this entry is a dynamic DHCP entry. The IP address is assigned to a DHCP
	client.
	To create a static DHCP entry using an existing dynamic DHCP entry, select this field, and then
	click Apply.
	To remove a static DHCP entry, clear this field, and then click Apply.

	77
ZyWALL 110/310/1100 Series User’s Guide