ZyXEL Communications 110, 1100, 310 Add, Edit, Address Group, Address Group Add/Edit, IPv4 Address Group Configuration, IPv6 Address Group Configuration

Chapter 28 Addresses

28.3.1 Address Group Add/Edit Screen

The Address Group Add/Edit screen allows you to create a new address group or edit an existing one. To access this screen, go to the Address Group screen (see Section 28.3 on page 388), and click either the Add icon or an Edit icon in the IPv4 Address Group Configuration or IPv6 Address Group Configuration section.

Figure 255 IPv4/IPv6 Address Group Configuration > Add

The following table describes the labels in this screen.

Table 145 IPv4/IPv6 Address Group Configuration > Add

LABEL	DESCRIPTION
Name	Enter a name for the address group. You may use 1-31 alphanumeric characters,
	underscores(_), or dashes (-), but the first character cannot be a number. This value is
	case-sensitive.
Description	This field displays the description of each address group, if any. You can use up to 60
	characters, punctuation marks, and spaces.
Member List	The Member list displays the names of the address and address group objects that have
	been added to the address group. The order of members is not important.
	Select items from the Available list that you want to be members and move them to the
	Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
	to select multiple entries and use the arrow button to move them.
	Move any members you do not want included to the Available list.
OK	Click OK to save your changes back to the ZyWALL.
Cancel	Click Cancel to exit this screen without saving your changes.

	389
ZyWALL 110/310/1100 Series User’s Guide