Chapter 9 Policy and Static Routes

Figure 110 Configuration > Network > Routing > Policy Route > Add/Edit (IPv6 Configuration)

The following table describes the labels in this screen.

Table 68 Configuration > Network > Routing > Policy Route > Add/Edit

LABEL

DESCRIPTION

Show Advanced

Click this button to display a greater or lesser number of configuration fields.

Settings / Hide

 

Advanced Settings

 

 

 

Create new Object

Use this to configure any new settings objects that you need to use in this screen.

 

 

Configuration

 

 

 

Enable

Select this to activate the policy.

 

 

Description

Enter a descriptive name of up to 31 printable ASCII characters for the policy.

 

 

Criteria

 

 

 

User

Select a user name or user group from which the packets are sent.

 

 

Incoming

Select where the packets are coming from; any, an interface, a tunnel, an SSL VPN, or

 

the ZyWALL itself. For an interface, a tunnel, or an SSL VPN, you also need to select

 

the individual interface, VPN tunnel, or SSL VPN connection.

 

 

Source Address

Select a source IP address object from which the packets are sent.

 

 

Destination Address

Select a destination IP address object to which the traffic is being sent. If the next hop

 

is a dynamic VPN tunnel and you enable Auto Destination Address, the ZyWALL

 

uses the local network of the peer router that initiated an incoming dynamic IPSec

 

tunnel as the destination address of the policy instead of your configuration here.

 

 

 

193

ZyWALL 110/310/1100 Series User’s Guide