ZyXEL Communications 110, 1100, 310 manual 275

	Chapter 19 Firewall
Table 100 Configuration > Firewall > Session Limit (continued)
LABEL	DESCRIPTION
User	This is the user name or user group name to which this session limit rule applies.
IPv4 Address	This is the IPv4 address object to which this session limit rule applies.
IPv6 Address	This is the IPv6 address object to which this session limit rule applies.
Description	This is the information configured to help you identify the rule.
Limit	This is how many concurrent sessions this user or address is allowed to have.
Apply	Click Apply to save your changes back to the ZyWALL.
Reset	Click Reset to return the screen to its last-saved settings.

19.3.1 The Session Limit Add/Edit Screen

Click Configuration > Firewall > Session Limit and the Add or Edit icon to display the Firewall Session Limit Edit screen. Use this screen to configure rules that define a session limit for specific users or addresses.

Figure 166 Configuration > Firewall > Session Limit > Edit

The following table describes the labels in this screen.

Table 101 Configuration > Firewall > Session Limit > Edit

LABEL	DESCRIPTION
Create new	Use to configure any new settings objects that you need to use in this screen.
Object
Enable Rule	Select this check box to turn on this session limit rule.
Description	Enter information to help you identify this rule. Use up to 60 printable ASCII characters.
	Spaces are allowed.
User	Select a user name or user group to which to apply the rule. The rule is activated only
	when the specified user logs into the system and the rule will be disabled when the user
	logs out.
	Otherwise, select any and there is no need for user logging.
	Note: If you specified an IP address (or address group) instead of any in the field below, the
	user’s IP address should be within the IP address range.
Address	Select the IPv4 source address or address group to which this rule applies. Select any to
	apply the rule to all IPv4 source addresses.
IPv6 Address	Select the IPv6 source address or address group to which this rule applies. Select any to
	apply the rule to all IPv6 source addresses.

	275
ZyWALL 110/310/1100 Series User’s Guide