ZyXEL Communications 110, 1100, 310 manual 407

Chapter 31 AAA Server

Figure 269 Configuration > Object > AAA Server > RADIUS > Add

The following table describes the labels in this screen.

Table 156 Configuration > Object > AAA Server > RADIUS > Add

LABEL	DESCRIPTION
Name	Enter a descriptive name (up to 63 alphanumerical characters) for identification purposes.
Description	Enter the description of each server, if any. You can use up to 60 printable ASCII
	characters.
Server Address	Enter the address of the RADIUS server.
Authentication	Specify the port number on the RADIUS server to which the ZyWALL sends authentication
Port	requests. Enter a number between 1 and 65535.
Backup Server	If the RADIUS server has a backup server, enter its address here.
Address
Backup	Specify the port number on the RADIUS server to which the ZyWALL sends authentication
Authentication	requests. Enter a number between 1 and 65535.
Port
Timeout	Specify the timeout period (between 1 and 300 seconds) before the ZyWALL disconnects
	from the RADIUS server. In this case, user authentication fails.
	Search timeout occurs when either the user information is not in the RADIUS server or the
	RADIUS server is down.
Case-sensitive	Select this if you want configure your username as case-sensitive.
User Names
Key	Enter a password (up to 15 alphanumeric characters) as the key to be shared between the
	external authentication server and the ZyWALL.
	The key is not sent over the network. This key must be the same on the external
	authentication server and the ZyWALL.

	407
ZyWALL 110/310/1100 Series User’s Guide