Chapter 16 IP/MAC Binding
Interfaces Used With IP/MAC Binding
IP/MAC address bindings are grouped by interface. You can use IP/MAC binding with Ethernet, bridge, VLAN interfaces. You can also enable or disable IP/MAC binding and logging in an interface’s configuration screen.
16.2 IP/MAC Binding Summary
Click Configuration > Network > IP/MAC Binding to open the IP/MAC Binding Summary screen. This screen lists the total number of IP to MAC address bindings for devices connected to each supported interface.
Figure 141 Configuration > Network > IP/MAC Binding > Summary
The following table describes the labels in this screen.
Table 88 Configuration > Network > IP/MAC Binding > Summary
LABEL | DESCRIPTION |
Edit | |
| entry’s settings. |
|
|
Activate | To turn on an entry, select it and click Activate. |
|
|
Inactivate | To turn off an entry, select it and click Inactivate. |
|
|
# | This field is a sequential value, and it is not associated with a specific entry. |
|
|
Status | This icon is lit when the entry is active and dimmed when the entry is inactive. |
|
|
Interface | This is the name of an interface that supports IP/MAC binding. |
|
|
Number of | This field displays the interface’s total number of IP/MAC bindings and IP addresses that the |
Binding | interface has assigned by DHCP. |
|
|
Apply | Click Apply to save your changes back to the ZyWALL. |
|
|
16.2.1 IP/MAC Binding Edit
Click Configuration > Network > IP/MAC Binding > Edit to open the IP/MAC Binding Edit screen. Use this screen to configure an interface’s IP to MAC address binding settings.
242 |
|
ZyWALL 110/310/1100 Series User’s Guide | |
|
|