ZyXEL Communications 110, 1100, 310 Create new, Create Object

Chapter 25 Bandwidth Management

Figure 234 Configuration > Bandwidth Management > Add/Edit

The following table describes the labels in this screen.

Table 128 Configuration > Bandwidth Management

LABEL	DESCRIPTION
Create new Object	Use to configure any new settings objects that you need to use in this screen.
Configuration
Enable	Select this check box to turn on this policy.
Description	Enter a description of this policy. It is not used elsewhere. You can use
	alphanumeric and ()+/:=?!*#@$_%- characters, and it can be up to 60
	characters long.
Criteria	Use this section to configure the conditions of traffic to which this policy applies.
User	Select a user name or user group to which to apply the policy. Use Create new
	Object if you need to configure a new user account. Select any to apply the policy for
	every user.
Schedule	Select a schedule that defines when the policy applies or select Create Object to
	configure a new one (see Chapter 30 on page 396 for details). Otherwise, select none
	to make the policy always effective.
Incoming Interface	Select the source interface of the traffic to which this policy applies.

356
	ZyWALL 110/310/1100 Series User’s Guide