Chapter 10 Routing Protocols

Table 75 Configuration > Network > Routing Protocol > OSPF (continued)

LABEL

DESCRIPTION

Add

Click this to create a new OSPF area.

 

 

Edit

Double-click an entry or select it and click Edit to open a screen where you can

 

modify the entry’s settings.

 

 

Remove

To remove an entry, select it and click Remove. The ZyWALL confirms you want to

 

remove it before doing so.

 

 

#

This field is a sequential value, and it is not associated with a specific area.

 

 

Area

This field displays the 32-bit ID for each area in IP address format.

 

 

Type

This field displays the type of area. This type is different from the Type field above.

 

 

Authentication

This field displays the default authentication method in the area.

 

 

Apply

Click this button to save your changes to the ZyWALL.

 

 

Reset

Click this button to return the screen to its last-saved settings.

 

 

10.3.2 OSPF Area Add/Edit Screen

The OSPF Area Add/Edit screen allows you to create a new area or edit an existing one. To access this screen, go to the OSPF summary screen (see Section 10.3 on page 201), and click either the Add icon or an Edit icon.

Figure 119 Configuration > Network > Routing > OSPF > Add

206

 

ZyWALL 110/310/1100 Series User’s Guide