Quick & hot deluxe Niagara.qxd:Cafet Tefal Express 01_FR. qxd 10/06/09 14:28 Page 9
Product description
GB
AWater tank
B Tank lid
C Water release valve D Body of the appliance E Down pipe
F Nozzle that can be dismantled for cleaning
G Ambient temperature button (according to model) H Hot water button
I Rubber grip to adjust the nozzle height J Filter cartridge (according to model)
K Removable drip tray (dishwasher safe) (according to model) L Cartridge change indicator (according to model)
M Descaling indicator (according to model)
First Use - Rinsing your appliance
1 - Unpack your appliance. Keep the Claris Filter cartridge (according to model) to one side.
2 - Engage the lid on the body of the product. (fig. 1, 2, 3)
3 - Wash and dry the water tank. Fill the water tank with cold water. (fig. 4, 5)
4 - Place the water tank onto the appliance and then close the lid onto the water tank. Press the water tank firmly into place.
(fig. 6)
5 - Place the appliance on a flat, stable
6 - Plug the appliance in.
7 - Place a container that holds approximately 1.7 litres under the nozzle.
8 - Adjust the nozzle according to the height of the container by pulling the rubber grip up or pushing it down.
9 - Press the hot water button, hot water will begin to dispense from the spout. 220ml of hot water will be dispensed automatically, repeat the process until the water tank is empty. (fig. 7)
NB | : The noise and vibration during use is the pump operating. This is normal. |
10 - When the container is almost full, discard the water.
NB | : A little water may splash from the nozzle. To avoid this, we recommend you use a taller vessel or hold the cup |
| closer to the nozzle. |
To remove or fit the drip tray,
Fitting the Claris Filter cartridge (according to model)
1 - Unwrap the Claris Filter cartridge. Hold the Claris Filter cartridge under a tap and rinse it for 30 seconds under running water to eliminate any carbon residues.
2 - Note the month in which you begin to use the cartridge by turning the upper ring on the cartridge. We would suggest that the month should be the one showing in the left hand side of the opening. (fig. 8)
3 - Fit the Claris Filter cartridge into the water tank by making a quarter turn clockwise. (fig. 9)
4 - The Claris Filter cartridge should be replaced after approximately 50 litres of water used, or after approximately 6 weeks depending on frequency of use. For models with cartridge change indicator, change the cartridge when the blue light turns on. (fig. 10)
5 - Once you have changed the Claris Filter cartridge, press and hold the hot and ambient buttons simultaneously for approximately 5 seconds. The reset is memorised and the blue light will turn off (according to model). (fig. 11)
6 - Place a container under the nozzle and press the hot water button. Run a 220ml cycle of water into a cup and then discard it, in order to remove any final carbon residues from the filter.
The benefits of using Claris Filter cartridge
You can use your Quick & Hot without a cartridge but for best results we recommend using a Claris filter cartridge. The Claris Filter cartridge will only filter the water as you dispense it, so you always have fresh filtered water. The cartridge contains an antilime substance and activated carbon that reduces chlorine, impurities, lead, copper, pesticides etc that are present in water. Minerals and trace elements are preserved. You can purchase a cartridge - ref: XH5001 from our web site: www.tefal.com
9