3Com 3CRDSF9PWR manual Lacp Modify

129

Modifying LACP Aggregated links can be set up manually or automatically established by enabling LACP on the relevant links. Aggregate ports can be linked into link-aggregation port-groups. The LACP Modify Page contains fields for modifying LACP system and port priority for LAGs.

Monitor users have no access to this page.

To modify LACP for LAGs:

1Click Port > LACP > Modify. The LACP Modify Page opens:

Figure 66 LACP Modify Page

The LACP Modify Page contains the following fields:

■LACP System Priority — Specifies system priority value. Ports must be configured with the same system priority to join the same LAG. The default value is 32768. The field range is 0-65535.

■Select Port — Selects the port number to which timeout and priority values are assigned.

■LACP Port Priority — Specifies the LACP priority value for the port. If an active port link goes down, the backup port with the highest priority is selected to replace the downed link. However, if two or more ports have the same LACP port priority, the port with the lowest physical port number will be selected as the backup port. The default is 32768. The field range is 0-65535.

2Define the fields.