117
The Port Administration Setup Page contains the following fields:
■Port State — Specifies the port state. The possible values are:
■Enabled — Enables the port.
■Disabled — Disables the port.
■No Change — Retains the current port status.
■Flow Control — Specifies the flow control status on the port. Operates when the port is in full duplex mode. The possible field values are:
■Enabled — Enables flow control on the port.
■Disabled — Disables flow control on the port.
■No Change — Retains the current flow control status on port.
■Speed — Specifies the configured rate for the port. The port type determines what speed setting options are available. The possible field values are:
■10 — Indicates the port is currently operating at 10 Mbps.
■100 — Indicates the port is currently operating at 100 Mbps.
■1000 — Indicates the port is currently operating at 1000 Mbps.
■Auto — Use to automatically configure the port.
■No Change — Retains the current port speed.
■Duplex — Specifies the port duplex mode. This field is configurable only when the port speed is set to 10M or 100M. The possible field values are:
■Full — The interface supports transmission between the device and its link partner in both directions simultaneously.
■Half — The interface supports transmission between the device and the client in only one direction at a time.
■Auto — Use to automatically configure the port.
■No Change — Retains the current port duplex mode.
■Select Ports — Selects the ports to be configured.
2Define the configuration fields.
3Select the ports to which these settings will be applied.
4Click 
. The ports are configured, and the device is updated.
