3Com 3CRDSF9PWR manual To configure ARP entries, ARP Settings Setup

Configuring ARP Settings 145

Defining ARP Settings The ARP Settings Setup Page allows network managers to define ARP parameters for specific interfaces.

Monitor users have no access to this page.

To configure ARP entries:

1Click Administration > ARP Settings > Setup. The ARP Settings Setup Page opens:

Figure 76 ARP Settings Setup Page

The ARP Settings Setup Page contains the following fields:

■IP Address— Defines the station IP address, which is associated with the MAC address. Note that this address must be within the same IP subnet as that assigned to the switch (see Defining IP Addressing on page 142).

■MAC Address — Defines the station MAC address, which is associated in the ARP table with the IP address.

■ARP Entry Age Out — Specifies the amount of time (in seconds) that passes between ARP Table entry requests. Following the ARP Entry Age period, the entry is deleted from the table. The range is 1-86400seconds. The default value is 1200 seconds.

2Define the fields.

3Click . The ARP parameters are defined, and the device is updated.