142CHAPTER 9: CONFIGURING IP AND MAC ADDRESS INFORMATION
Defining IP | The IP Setup Page contains fields for assigning an IP address. The Default |
Addressing | Gateway is erased when the IP Address is modified and changed. Packets |
| are forwarded to the default gateway when sent to a remote network. |
| Monitor user has no access to this page. |
| To define an IP interface: |
| 1 Click Administration > IP Setup. The IP Setup Page opens: |
| Figure 74 IP Setup Page |
The IP Setup Page contains the following fields:
■Configuration Method — Defines whether the IP address is configured statically or dynamically. The possible field values are:
■Manual — Specifies that the IP Interface is configured by the user.
■DHCP — Specifies that the IP Interface is dynamically created.
■IP Address — Defines the IP address.
■Subnet Mask — Defines the subnet mask.
■Default Gateway — Defines the default gateway.
2Select Manual or DHCP mode.
3If Manual is selected, configure the IP Address, Subnet Mask and Default Gateway.
4Click 
. The IP configuration is enabled, and the device is updated.
