92 | 3 Hardware configuration |
Label Description
APower cable
BData cable
CScrew
Note: If you are not installing a replacement device, install a metal EMI shield on the bay to maintain proper cooling and EMI shielding.
10Remove the new diskette drive from its protective wrapper and place it on an antistatic surface.
11Record the drive model and serial numbers in your equipment log. For a sample equipment log sheet, refer to page 195.
12Set any jumpers or switches according to the drive manufacturer instructions.
13Position the new drive with the component side up and slide the
back of the drive under the ears at the back of the bracket.
14
