52

3 Hardware configuration

To install the access cover to the system boards

1Orient the access cover with the captive screws toward the front of the server.

2Insert the tabs on the rear of the cover into the slots at the rear of the chassis.

3Press down gently and tighten the captive screws at the front of the cover.

Memory board

To remove the memory board

1Grasp the bracket on the top edge of the memory board and pull straight up until the board disengages from the connector on the processor board.

2Lift the memory board out of the chassis.

Figure 18 - Removing the memory board

Page 68
Image 68
Acer G901 manual Memory board, To install the access cover to the system boards, To remove the memory board